Features of Dijet PNS REBORN
HIGH-PERFORMANCE MILLING WITH DOUBLE-SIDED 10-EDGE INSERT.
- In case of ap ≦ 2mm, High feed machining is possible by using 27 degree cutting edge.
- 1.6 times higher feed per tooth compered with 45°face mill cutter
- In case of ap > 2mmHigh efficient machining is possible by Large depth of cut 45 degree cutting edge achieve max. ap 5mm
- Smooth cutting by large rake angle
- φ50～φ125 with coolant hole
- φ160～φ250 without coolant hole
New coating grade DS2 AND DP1 available
